Sunday, August 29, 2010

Offline Gmail to browse gmail from computer by downloading the whole gmail

Hi,

Offline Gmail is available to everyone who uses Gmail , so if you don’t see it under the Labs tab yet, it should be there soon. Once you see it, just follow these steps to get started:
  • Click Settings and click the Labs tab.
  •  Select Enable next to Offline Gmail.
  •  Click Save Changes.
  •  After your browser reloads, you’ll see a new “Offline0.1″ link in the upper righthand corner of your account, next to your username. Click this link to start the offline set up process and download Gears if you don’t already have it.


When you hit save, Gmail will synchronize new messages you didn’t have downloaded before and remove the ones you’re not planning to read from your hard drive. You can always change your settings back to keep fewer or moremessages later on — fewer messages means Offline Gmail runs faster

Shutdown Computer With Command Prompt or shortcut for shutdown.

Hi,
Here is a trick to shutdown your computer  at a specific time. You might be thinking what great about it, well you can shutdown your computer without the use of any software. Just shutdown your computer at specific time from RUN Command.
Procedure:

Start=>Run
Type Code: at (Specific time) shutdown -s
To cancel or Abort the shutdown:
Type Code:  shutdown -a
Type  Code:  “shutdown –s –m\\computername –t60”. This command will shutdown the computer on network if you have administrative access.  Here computername needs to be replaced by the exact computer name of the computer on the network to work.

  • Alternative method to create a shutdown timer or simply computer shutdown shortcut

Step 1: Right click on your desktop and choose “New=>shortcuts”.Step 2: In the box that says “Type the location of the shortcut”,
type in “
shutdown -s -t 3600” without the quotation marks and click next.
Note: 3600 are the amount of seconds before your computer shuts down. So , this means 3600 seconds = 60 mints (1 hour). You can change the value in the above code. You can even create multiple shutdown shortcuts. For example a computer shutdown shortcut for 30 minutes, 1 hour, 2 hours, 5 hours etc.,
Step 3: Make up a name for the shortcut and you’re done.
Optional Step 4 : You can change the icon by right clicking=>properities=>change icon=>browse
To abort or cancel the shutdown:
To make an abort key to stop the shutdown timer just create another shortcut and make
the “location of the shortcut” to ” shutdown -a” without the quotes.

Gmail Drive guide to use Gmail space as online storage drive

Hi,
Now You Can Use Online Space (Upto 7.31GB) Through Gmail Drive ......


Requirement:
  • You Must Have An Gmail Account.
  • Gmail Drive Software in your Computer.


Click to Download  Gmail Drive Software .

Procedure:
  • IInstall the software. 
  •  After installing, a drive named Gmail drive will be created in My Computer (just like C: D. Drives) 
  • Double click on this drive, login to Gmail acct. You will get a space of 7.38 GB.

     















    NOTE
    Whatever content you copy to this drive will be sent to your mail acct directly to which you have logged in. The copy is Really Fast. 

    Saturday, August 28, 2010

    Now SMS Notification of Scraps

    Hi,


    Orkut launched one of the most awaited feature - Notification via SMS. This feature let you receive new scrap notifications, get friend info, and more from your mobile device.


    This new feature is available in India and Brazil only. Moreover in India. Aircel, BPL, MTNL, Reliance, Spice and Tata networks are supported.


    Procedure:
    • Login in to your orkut profile.

    • Go to my setting.

    • Click mobile (my setting).












    • Write your mobile number (example:9463400002)---->Next.

    • Then orkut verification code at your mobile phone.

    • Fill at verfication textbox --->confirm.













    Its Real Working ....Check it out!!!!!!

    Monday, August 23, 2010

    Hide all drives from My Computer

    Hi,


    This is a great trick you can play on your friends. To disable the display of local or networked drives when you click My Computer.


    How to Hide the drives(c:,d:,e:,...etc) in Ur Computer


    1. Go to Start -> Run.
    2. Type regedit
    3. Now go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
    4. Now in the right pane, create a new DWORD item and name it NoDrives (it is case sensitive).
    5. Now modify it's value and set it to 3FFFFFF (Hexadecimal) .
    6. Now restart your computer.
    7. So, now when you click on My Computer, no drives will be shown(all gone...).

    To enable display of drives in My Computer, simply delete this DWORD item that you created. Again restart your computer. You can now see all the drives again. Magic.......

    How to Operate Mouse Pointer Without Mouse (Magic)

    Hi;


    You have Mouse Problem ?? No Problem ...........I will give you suggestion .

    Press Left 
    Alt + Left Shift + Num Lock Button....  Press OK.

    with the help of  Numeric Keypad e.g ( Press and Hold the following Keys )

    7   8    9
    
    4        6
    
    1   2    3
    


    For Normal (Left) Click Press 


    Default 
    Left Alt + Left Shift + Num Lock 

    Some Important Tricks And Tips For Google Chrome.

    Hi,


    • Zoom IN/OUT:

    For those who find that the font is too big/small for your viewing, you can zoom in/out the page by pressing Ctrl + Mousewheel.



    • DRaG and droP tab to load in a new window:


    When you have more than one tabs, you can easily drag any tab and drop it on the menu bar to load a new window.



    • Change Chrome theme:


    If you don’t like the default theme, you can easily change it with the following steps:
    • Download a Chrome theme of your liking
    • Extract the default.dll file.
    • Navigate to your Chrome installation directory and go to /Application/Chrome version/Themes folder. The Chrome version will be in the form of 0.2.129.27. Replace the default.dll file in the folder with the default.dll file that you have just extracted.
    • Voila! Your Chrome is now dressed with the new theme.



    Thursday, August 19, 2010

    Most Common Computer Problems and Their Solution (Part-III)

    to be continued.................



    • Regedit Disabled By Admin:
    Open Notepad pad, copy paste the following text to the note pad::

    REGEDIT4
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersio
    n\Policies\System]
    "DisableRegistryTools"=dword:00000000

    Save the text file as any name u with extension .reg

    example:- "enable.reg"

    After that double click to run the file



    • Improving the Slow Boot up time:






    There are a variety of reasons why your windows XP system would boot slowly. Most of the times it this has to do with the startup applications. If you would like to speed up the bootup sequence, consider removing some of the startup applications that you do not need. Easiest way to remove startup apps is through System Configuration Utility. Go to Start then Run and enter MSCONFIG and go to the Startup tab. Deselect/UnCheck application(s) that you do not want to startup at boot time.



      •  Stand By Icon Disabled:

        Problem:



        I reinstalled my windows and now "Stand By" option is Grey out in shutdown dialog box and I can't use it.

        Sol: Install VGA drivers from your motherboard CD and the option will be enabled. If you don't have the motherboard CD, then go to the manufacturer site and download the required drivers.







        • Force windows XP to reboot upon crashing:



        This registry edit will cause your system to reboot itself automatically upon crashing. This can be useful if you have a reason for keeping your system on 24/7:


        Open REGEDIT

        Navigate to 'HKEY_LOCAL_MACHINE\SYSTEM
        \CurrentControlSet\Control\CrashControl'

        Edit the 'AutoReboot' value to '1'






        • Blank User Accounts Applet :

        Problem:

        When you double-click User Accounts applet in the Control Panel, the User Accounts applet opens, but it may be completely blank.

        The buttons Back | Forward | Home are displayed in the dialog.

        Resolution:
        To resolve the problem, type these commands from Start, Run dialog:

        regsvr32 jscript.dll

        If that does not help, execute the following commands as well.

        regsvr32 nusrmgr.cpl
        regsvr32 /i mshtml.dl


        Most Common Computer Problems and Their Solution (Part-II)

        To be Continued..........................
        • My Windows Login Screen has changed to "Classic Logon Box". I want the new Welcome Screen back.
        Solution:

        Type "control userpasswords" in RUN dialog box or Open "User Accounts" in Control Panel. Then click on "Change the way Users log on and off". Now check the option "Use Welcome Screen". If you get following error:
        Uninstall client services for netware.
        Then Open "Network Connections" and open Properties of your Internet Connection. Now goto "Networking" tab and select "Client services on Netware" option and click on the"Uninstall" button.











        • Whenever I start my computer, Scandisk starts running even I proper shut down the PC last time.

        Solution:
        Do as following:

        A. Open regedit and goto:

        Code:
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

        In right-side pane, change the value of BootExecute to:

        autocheck autochk *

        B. If the above trick doesnt help then give following commands in Command Prompt:

        chkntfs /x drive_name

        for e.g., if ScanDisk runs automatically for C: and D: drives, then give following commands one by one:

        chkntfs /x C:
        chkntfs /x D:








        • When I start my computer, I get error message:
        solution:

        "Windows\System32\config\system" file missing or corrupt

        Solution::
        Boot using Windows Setup CD and enter into "Recovery Console" by pressing "R". Now Log into windows installation and enter admin password. Now give following commands at prompt:

        copy %windir%\Repair\system %windir%\System32\Config

        If it doesnt work, then again boot into "Recovery Console" and give following commands:

        fixmbr
        bootcfg /scan
        bootcfg /rebuild
        fixboot

        Win XP Tweaks

        STARTUP







        •  I can't see Hidden files/folders in my computer. Even I enable the option "Show hidden files/folders" in "Tools -> Folder Options", its automatically disabled again.





        Solution1: Go to your Start menu, click on Run and open up your Registry Editor by typing "regedit" without the quotes and pressing OK.

        Once there go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\Folde r\Hidden\SHOWALL

        Delete the value CheckedValue. (Its type should be REG_SZ and data should be 0 or 1.)

        Create a new DWORD value called CheckedValue (same as above, except that the type is REG_DWORD) by right clicking on the right pane->New->DWORD Value. Modify the value data to 1 (0x00000001).
        Solution 2: Open regedit and goto:
        HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced
        In right-side pane, change value of "Hidden" to as following:

        1 - To show hidden file
        2 - To not show hidden files

        If it doesn't work, then scan your computer with an anti-virus software.




        • Restore Deleted Recycle Bin Icon from Desktop:
        Method #1:

        1. Right-click an empty area of your desktop
        2. Select Properties
        3. Click the Desktop tab
        4. Click the Customize button
        5. Click Restore Default
        6. Exit all windows and restart your computer

             Method #2:


        Note: Be sure to make a backup copy of your registry prior to making any changes.

        Go to Start>> Run. Type in: regedit [Enter]

        Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Desktop\NameSpace

        Hold the mouse on NameSpace and right-click once. From the resulting menu, select Edit>> New>> Key

        Copy and Paste the following Key code (including the brackets):

        {645FF040-5081-101B-9F08-00AA002F954E}

        Press Enter on your keyboard, exit the registry editor and restart your system.




        Recent Popular Posts